Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 45
Setting Area, Output, and Door Schedules
The Schedules function allows you to assign up to 8 dierent schedule numbers to
each area, output, and door access relay connected to your system. The schedule
number allows the opening and closing times for the area and on/o times for
outputs and door access relays
1. Access the User Menu.
2. Press COMMAND until SCHEDULES? displays. Press any Select Key.
3. At TIMESAREASDOOR, press the COMMAND key and the display changes
to OUTPUT HOLIDAYS. Select AREAS, DOOR, or OUTPUT.
4. At ENTER THE AREA/OUTPUT/DOOR NUMBER, enter the area, output, or
door number you want to assign a schedule. Press the COMMAND key.
5. At SCHEDULENO, press any Select Key and enter the schedule
number (01 to 99). Press the COMMAND key. The keypad returns to
the TIMESAREASDOOR display allowing you to enter additional
programming.
To Next Page
Loading...
Need help?
General
