DMP Electronics XTLtouch - Keypad Input Methods; Number Key to Select Area Mapping; Number Pad and Standard Keyboard Layouts

Digital Monitoring Products | XTLtouch Installation Guide 7
Wire for Power
See Figure 5 for wire routing instructions before wiring the XTLtouch for
power.
1. Connect the XTLtouch +DC terminal to the positive terminal on the
power supply.
2. Connect the XTLtouch -DC terminal to the negative terminal on the
power supply.
3. Plug the power supply into a 120 V AC 60Hz dedicated outlet that’s
not controlled by a switch.
4. Place the XTLtouch back on to the mounted backplate.
3