Digital Monitoring Products | XTLtouch Installation Guide 5
2. Use the include mounting template, level, and #6 screws to mount the
backplate to the wall. See Figure 2 for mounting hole locations.
Install the 265LTE-V-GW Cellular Communicator (Optional)
1. Remove the set screw from the bottom of the XTLtouch.
2. Remove the four screws from the back of the XTLtouch.
3. Separate the base from the panel and keypad. See Figure 3.
2
Figure 3: Installing the 265LTE-V-GW
To Next Page
Loading...
