XTLtouch Installation Guide | Digital Monitoring Products 14
3
Install the XTLtouch in the Backbox
1. See Wall Mount Installation to wire
the XTLtouch.
2. Insert the top of the XTLtouch into
the backbox at a slight angle until
the XTLtouch slots connect to the
backbox tabs.
3. Push the bottom of the keypad into
the backbox until the lower slots
snap in to place. See Figure 11.
See LT-1321 for additional backbox
mounting instructions.
Figure 11: Placing the XTLtouch
To Next Page
Loading...
