DMP Electronics XTLtouch - System Arming Procedures; Standard Arming Process; Instant Arming Process; Bypassing Zones Before Arming

Digital Monitoring Products | XTLtouch Installation Guide 9
DESK STAND INSTALLATION
See Steps 1 and 2 in Wall Mount installation to install the optional
265LTE-V-GW.
Install the Desk Stand Legs
1. Insert one leg into the holes in the back of the XTLtouch.
2. Slide the leg upwards until the leg firmly snaps into place. Repeat
steps 1 and 2 to install the other leg. See Figure 6.
1
Figure 6: Connecting the Desk stand Legs