www.dmsimfg.com
You can also nd the manual online at:
www.dmsimfg.com/StandAloneManual
HARDWARE DESCRIPTION
Cabling
Twisted-pair segments can be connected with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cable. The cable must
comply with the IEEE 802.3u 1000Base TX standard for Category
5. The cable between the converter and the link partner (converter,
switch, hub, workstation, etc.) must be less than 100 meters (328
ft.) long.
Fiber segment using multi-mode connector type must use 50 or
62.5/125μmmulti-modeber.Usercanconnecttwodevicesupto
550M distance.
To Next Page
Loading...