DMSI 10 - Introduction; Cables

www.dmsimfg.com
You can also nd the manual online at:
www.dmsimfg.com/StandAloneManual
OVERVIEW
INTRODUCTION
DMSI’s 10/100 and 10/100/1000 stand-alone ethernet media
convertersareanecientandadaptablesolutionintheeldofLAN
campus networking. It mediates between a 10, 100, or 1000Base-
TX segment, and a 1000Base-FX segment. Gigabit converters can
extend the conventional 10M or 100/1000M fast ethernet out to
20km-120kmviathefastethernetber-opticalline.Itisprimarily
designed for large, higher speed/bandwidth demanding work group.
Please notify your sales representative immediately if any of the
items are missing or damaged.
CABLES
DMSI recommends using high quality, low loss bend insensitive
berpatchcordswithmediaconvertersolutions.Bendinsensitive
berprovidesauserfriendlysolutionforFTTDapplications,andis
very forgiving if bent in tight spaces. Recommend LC duplex to LC
duplex part numbers are:
Multimode:
Forusewith62.5µmOM1: 3131002F2N9xxxM
Forusewith50µmOM2/3: 3131002G2A9xxxM
Single-mode:
For use with SM OS2: 3131002Y2Y9xxxM
Replace xxx with required length in meters (three digits).