MESSAGE DESCRIPTION
AUTOMATIC
MODE NOT
AVAILABLE
The transmission is unable to
shift itself automatically, due to
a fault condition. Use the
AutoStick威 mode to shift the
transmission manually. See
your authorized dealer for di-
agnosis and service.
REDUCE GEAR
CHANGES
The transmission pump is
overheating. In AutoStick威
mode, try to drive in one spe-
cific gear as much as possible,
avoiding frequent gear
changes. In DRIVE, the trans-
mission will automatically
modify its shift schedule to re-
duce the number of shifts.
MESSAGE DESCRIPTION
TRANS. GETTING
HOT PRESS BRAKE
The transmission driving clutch
is overheating, usually due to
repeated launches in stop-
and-go traffic. Pull over and
allow the transmission to cool
in NEUTRAL until “TRANS.
COOL READY TO DRIVE ” is
displayed.
TRANS. HOT STOP
SAFELY SHIFT TO P
The transmission driving clutch
has overheated. Pull over and
shift the transmission into
PARK and allow the vehicle to
cool until “TRANS. COOL
READY TO DRIVE” is dis-
played.
SERVICE TRANS-
MISSION
A transmission fault has been
detected. See your authorized
dealer for diagnosis and service.
406 STARTING AND OPERATING
To Next Page
Loading...
Need help?
General
