27
By fully adjusting articulators:
Remove all “Scan Plates” from the
platform and insert fully adjustable
articulator in the platform. You will get
the best result if the incisor pin is
removed from the pin.
By stone model/simple articulators:
Simply place the articulated upper and
lower jaws on the scan platform.
The camera axis will move up and down
to capture your occlusion relationship.
This step is to match the “Pre-Scan”
and “Detail Scan” data you have
obtained from the previous step.
You have two options to scan occlusion relationship.
Alignment (Matching) of Scan Data.
This step is to match Upper/Lower jaws
to scanned occlusion data.
To Next Page
Loading...