1010
To activate the receiver/collar, place
the red dot on the back of the handheld
transmitter to the red dot on the receiver/
collar. Hold the two red dots together
for a moment until the LED light on the
receiver/collar comes on.
To deactivate the unit, repeat the same
procedure holding the two red dots
together momentarily. The LED light will
turn red for a brief moment indicating that
the receiver/collar is now shut off.
The handheld transmitter does not have
an on/off switch, and it will only activate
when buttons are pressed.
1. How to turn on/o the unit
1. How to turn on/off the unit
Understanding your training
system
To Next Page
Loading...
