17
7. Charging the battery
1. Remove the rubber plug temporarily
and plug in the charger.
2. Plug the adapter’s power plug into a
standard AC wall outlet. The LED will
glow red.
:KHQFKDUJLQJLV¿QLVKHGWKH/('
will glow green. Unplug the adapter’s
power plug from the AC wall outlet and
disconnect the charger from the unit.
4. Place the rubber plug back in the battery
charging receptacle.
* The receiver/collar is still fully
waterproof even if the rubber plug is not
closed, but place the rubber plug in the
battery charging receptacle to make sure
dirt does not get inside.
7. Charging the battery
To Next Page
Loading...
