Introduction
Dolby
®
Digital Cinema System Manual Issue 0.92 (Preliminary) 79
A.1.4 DSL100 and Show Manager Login Utilities
The DSL100 provides various utilities that you can access using special login names. Access
a login prompt by pressing <Ctrl> + <Alt> +< F1> (<F2>, <F3>, and <F4> also provide login
consoles), then enter the password
dolby.
Config
When you type config at the login prompt and enter dolby at the password prompt, this
utility provides numerous options including:
• Configure network interfaces
• Select keyboard language
• Configure advanced options
• Offload/restore Show Manager Server database
• Configure optional SAS external storage device
Unconfig
When you type unconfig at the login prompt and enter dolby at the password prompt,
this utility allows the resetting of network configurations, deletion of all content, resetting
of parameters, or resetting the Show Manager Server database.
A.1.5 DSS220 and DSL100 Administrator Login
There is a user-level login called administrator. This login provides diagnostic and utility
functions, which allow installers or network administrators to troubleshoot networking,
directly review log files, execute remote software upgrades (see below), or reboot the
system.
You can access the login prompt on these systems by typing <Ctrl> + <Alt> + <F1> on a
connected keyboard.
The
administrator login uses the same password (dolby) as the config and unconfig
logins.
File System Access
The administrator login provides only restricted access to the general file system. A user
has read-only access to the
status/logs directory for diagnostic purposes, but cannot
modify the logs or the logs directory.
To Next Page
Loading...