How to fix insufficient power in my Dolmar PS-34?
If your Dolmar Chainsaw has insufficient power, the air filter might be dirty, the carburetor might be wrongly adjusted, the muffler could be clogged, the exhaust channel in the cylinder might be clogged, or the spark arrester screen might be clogged. To resolve this, clean the air filter, adjust the carburetor, and unclog the muffler and exhaust channels.
What to do if my Dolmar PS-34 starts then dies?
If your Dolmar Chainsaw starts but dies immediately, it could be due to a wrong idling adjustment, a dirty fuel filter or carburetor. Adjust the idling, and clean the fuel filter and carburetor. Alternatively, the tank venting might be defective, the fuel line interrupted, the cable defective, or the combination switch defective. Check and repair the venting, fuel lines, and cable connections to resolve this.
Why is my Dolmar Chainsaw not lubricating the chain?
If there is no chain lubrication in your Dolmar Chainsaw, the oil tank might be empty, or the oil guide groove might be dirty. Refill the oil tank and clean the oil guide groove to resolve this issue.
How to solve warm start difficulties in Dolmar PS-34?
If you're experiencing warm start difficulties with your Dolmar Chainsaw, it could be due to a wrong carburetor adjustment. Adjust the carburetor to resolve this.
What to do if Dolmar PS-34 Chainsaw chain does not run?
If the chain on your Dolmar Chainsaw does not run, it could be because the chain brake is actuated. Check if the chain brake is engaged and disengage it if necessary.
General| Type | Chainsaw |
|---|---|
| Power source | Gasoline |
| Power | 1.3 kW |
| Bar Length | 35 cm |
| Fuel Tank Capacity | 0.35 L |
| Oil Tank Capacity | 0.2 L |
To Next Page
