To Next Page
L
lmorrisJul 27, 2025
Why my Dolmar PS-35 C Chainsaw engine does not start or only starts with difficulty?
- JJonathan MartinezJul 27, 2025
If your Dolmar Chainsaw engine does not start, it may be due to a malfunction in the fuel supply system, compression system, or a mechanical malfunction. Check the STOP switch position, and inspect for faults or short-circuits in the wiring. The spark plug cap or spark plug could be defective, the combination switch might be in the Choke position, or the carburetor could be defective. Other potential causes include a dirty suction head, a bent or interrupted fuel line, a defective cylinder base packing ring or radial shaft packings, defective cylinder or piston rings, a spark plug that doesn't seal, a broken spring in the starter, or broken parts inside the engine.
General
