3
EN
Full Ceramic Gravity Discharge Toilet
1 Explanation of Symbols and
Safety Instructions
This manual has safety information and instructions to
help you eliminate or reduce the risk of accidents
and injuries.
1.1 Recognize Safety Information
This is the safety alert symbol. It is used to alert
you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Understand Signal Words
A signal word will identify safety messages and property
damage messages, and will indicate the degree or level
of hazard seriousness.
DANGER!
Indicates a hazardous situation that, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE: Used to address practices not related to
physical injury.
I
Indicates additional information that is not related
to physical injury.
1.3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before installing this
appliance:
• Read and follow all safety information and instructions
to avoid possible injury or death.
• Read and understand these instructions before
installation of this product.
• The installation must comply with all applicable local
or national codes, including the latest edition of the
following standards:
U.S.A.
– ANSI/NFPA70, National Electrical Code (NEC)
– ANSI/NFPA 1192, Recreational Vehicles Code
– ABYC guidelines for marine installations
Canada
– CSA C22.1, Parts l & ll, Canadian Electrical Code
– CSA Z240 RV Series, Recreational Vehicles
1.4 General Safety Messages
WARNING: ELECTRICAL SHOCK, FIRE,
FLOOD, AND/OR EXPLOSION HAZARD.
Failure to obey the following warnings could
result in death or serious injury:
• Use only Dometic replacement parts and
components that are specifically approved for use
with the appliance.
• This product must be installed and serviced by a
qualified service technician.
• Do not modify this product in any way. Modifi cation
can be extremely hazardous.
• For marine applications, seacocks must be installed
in all piping connected to through-the-hull fittings.
Seacocks must be easily accessible to all users of the
toilet, or secondary valves should be fitted in hose
runs where they are easily accessible.
• For marine applications, if the toilet is connected
to any through-the-hull fittings, always close the
seacocks when the toilet is not in use (even if
unattended for a brief period).
• For marine applications, valves must be full-bore
valves of marine sanitation quality. Do not use screw-
to-close gate valves.
• If the toilet uses fresh water for flushing and is
connected directly or indirectly to a municipal water
system at any time, the water connections must be
discon nected if the boat or RV is unattended (even if
unattended for a brief period).
To Next Page
Loading...
Need help?
General