To Next PageTo Next Page
Need help?Do you have a question about the Dometic 630516.321 and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | 630516.321 |
| Category | Air Conditioner |
| Language | English |
Alert symbol indicates potential personal injury. Follow precautions.
Signal words (WARNING, CAUTION) indicate risk level for potential injury or damage.
Explains condensation formation and how to minimize it for better performance.
Read instructions, follow codes, only use authorized accessories, service by qualified personnel.
Guidance on selecting the best roof location considering RV size and roof structure.
Instructions for preparing the roof opening, including vent removal or cutting a new opening.
Chart and requirements for duct sizing, layout, and register selection for ducted applications.
Recommendations for basic configurations and installer responsibilities for duct systems.
Details on routing and connecting 115 VAC and 12 VDC supply lines for the unit.
Guidelines for installing the control center and routing its cable, including location selection.
Criteria for selecting a suitable location for the Comfort Control Center indoors.
Instructions for routing and terminating the 4-conductor control cable for the Comfort Control Center.
Step-by-step guide to physically installing the Comfort Control Center base plate and unit.
Procedures for safely removing the unit from packaging and positioning it on the RV roof.
General steps for mounting the air conditioner unit onto the prepared roof opening.
Using a template to mark and cut the ceiling opening for the return air.
Instructions for installing the divider plate to ensure proper airflow and prevent leaks.
Guidelines for installations not using a center discharge duct, referencing other sections.
Specific steps for installing the Genesis Air Filtration System return air kit.
Detailed instructions for connecting all low voltage and high voltage wiring.
Connecting remote sensors, furnace, and energy management system wires.
Connecting the main AC power supply to the unit through the junction box.
Steps for installing the interior decorative return air cover and grill.
Final steps for Genesis kit installation, including wire connections and cover attachment.
Setting dip switches, resetting the system, and performing operational checks.
Setting DIP switches for zone selection, heat strip, furnace, and differential settings.
Procedure for resetting the system after configuration changes.
Verifying proper operation of all unit features after installation and configuration.
Wiring diagram for earlier versions of the specified Dometic models.
Wiring diagram for later versions of the specified Dometic models.
