Operation CFX3
34
7.22 Replacing the AC fuse
D
➤ Disconnect the power supply to the device.
➤ Pull out the connection cable.
➤ Pry out the fuse insert (fig. 4 4, page 4) with a screwdriver.
➤ Replace the defective glass fuse with a new one of the same type and rating
(Fast Acting, 4 A, 250 V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
7.23 Replacing the DC fuse
➤ Pry out the fuse cover (fig. 4 3, page 4) with a screwdriver.
➤ Reverse the fuse cover and use hook to remove the defective blade fuse.
➤ Push in a new fuse of the same type and rating.
➤ Re-fit the fuse cover.
7.24 Replacing the DC plug fuse
➤ Replace the defective fuse with a new fuse of the same type and rating.
➤ Proceed as shown (fig. q, page 17).
7.25 Replacing the light PCB
A
DANGER! Electrocution hazard
Disconnect the power supply and the connection cable before you
replace the device fuse.
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, service agent or
similarly qualified person to avoid hazard.
DometicCFX3_OPM_4445103157_EMEA16_202x-xx-xx.book Seite 34 Dienstag, 27. Oktober 2020 5:42 17
To Next Page
Loading...
