Dometic CTLP4110 - System Connections and Final Steps; Connecting Control Panel and Water Supply

EN
Installing the toilet CT4000
16
➤ Prepare an opening in the installation box for the control and operating panel
(fig. b).
➤ Connect the electrical cables to the connections of the control and operating
panel (chapter “Electrical connection” on page 22).
!
➤ Press in the retaining springs of the control and operating panel and push it into
the wall cutout.
➤ Follow the instructions in (chapter “Connecting the water supply” on page 20).
CAUTION!
There is a risk of injury due to the springs springing back!
60
R10
74
2.
1.
3.
b
CT4000-I-AUS.book Seite 16 Dienstag, 6. März 2018 1:18 13