Dometic CTLP4110 - Electrical and Technical Specifications; Connecting the Water Supply

EN
Installing the toilet CT4000
20
5.6 Connecting the water supply
A
➤ Use a spring band hose clamp to attach the freshwater supply hose to the
connection socket (fig. i 2).
➤ Perform a leak test.
NOTICE!
• The water supply is connected using a solenoid valve mounted in the
toilet housing (fig. i 1).
• The operating pressure (water pressure) of the solenoid valve should
not exceed 6 bar.
• The solenoid valve is damaged by excessive pressure.
2
1
i
CT4000-I-AUS.book Seite 20 Dienstag, 6. März 2018 1:18 13