Electrical connection CT4000
22
➤ Insert the hose of the vent into the integrated vent opening of the service door
and the cassette tank (fig. l).
6 Electrical connection
!
A
I
WARNING!
Have the electrical connection carried out by an electrician.
NOTICE!
• Do not connect the toilet to the voltage supply directly in parallel
with other power-consuming devices.
• Do not connect the control of the toilet to a pressurised water pump.
• The rated capacity of an external water pump should not exceed
60 W.
NOTE
• The external water pump is not included in the scope of delivery.
• A pre-fuse is not necessary, because the toilet is internally fused.
CT4000-I-AUS.book Seite 22 Dienstag, 6. März 2018 1:18 13
To Next Page
Loading...
