Target group for this manual SinePower
8
4 Target group for this manual
The electrical installation (chapter “Connecting the inverter” on page 12) is intended
for professionals who are familiar with the applicable regulations of the country in
which the equipment is to be installed and/or used.
All other chapters are intended for the users.
5 Intended use
!
The wave inverter converts direct current into a 230 V AC supply of 50 Hz:
• 12 Vg: DSP612, DSP1012, DSP1512, DSP2012
• 24 Vg: DSP624, DSP1024, DSP1524, DSP2024
6 Technical description
The inverters can be operated wherever a DC connection is available:
• 12 Vg: DSP612, DSP1012, DSP1512, DSP2012
• 24 Vg: DSP624, DSP1024, DSP1524, DSP2024
The light-weight and compact construction of this device allows for easy installation
in mobile homes, commercial vehicles or motor and sailing yachts.
The output voltage corresponds to the household voltage from the socket (pure sine
wave, THD <5 %).
Please observe the values for constant output power and peak output power as
indicated in chapter “Technical data” on page 18. Never connect devices that have
a higher power requirement.
I
WARNING!
Never use the inverter on vehicles where the positive terminal of the
battery is connected to the chassis.
NOTE
Note when connecting devices with an electrical drive (such as power
drills and refrigerators), that they often require more power than is
indicated on the type plate.
DSP600-2000--IO-16s.book Seite 8 Montag, 7. Mai 2018 1:39 13
To Next Page
Loading...
Need help?
General