Dometic Go Power! GP-SB-PWM-30BT - Operation; 4.1 User Interface Overview; Display Icon Meanings; Parameter Identifier Explanations

[page 12] | gopowersolar.com
4. OPERATION
If a battery is still not detected after the fth trial, the controller shows error number 32 to indicate this failure. The controller gives up
until it is either manually reset by disconnecting and reconnecting solar power. The solar controller will not engage in this process if a
new day is detected through the solar panel(s). Pressing the back button will also stop the process.
Icons Indicators
Parameters Identiers
Value Indicators
Value Units
Battery Type Indicator
GP-SB-PWM-30-BT
2
1
3
4
5
1
2
3
4
5
4.1 USER INTERFACE
The GP-SB-PWM includes an LCD screen with 4 mechanical buttons that act as navigation keys to control the display.
Note
GP-SB-PWM-10 GP-SB-PWM-30-BT
4. OPERATION