Scope of delivery MSI924M
10
• Even after the fuse triggers, parts of the inverter remain live.
• Always disconnect the power supply when working on the device.
A
NOTICE!
• Make sure the air inlets and outlets of the device are not covered.
• Ensure good ventilation. The inverter produces dissipated heat which
has to be diverted.
• Do not connect the 220 V output of the inverter (fig. 5 5, page 4) to
a different 220 V source.
3Scope of delivery
4Accessories
5 Target group for this manual
The electrical installation (chapter “Connecting the inverter” on page 14) is intended
for professionals who are familiar with the applicable regulations of the country in
which the equipment is to be installed and/or used.
All other chapters are intended for the users.
No. in
fig. 1,
page 3
Designation
1 Sine wave inverter
– Operating manual
Designation Ref. no.
Remote control MCR9M
MSI924M-IO-16s.book Seite 10 Mittwoch, 5. April 2017 5:18 17
To Next Page
Loading...
