Explanations: Select the desired power supply by turning the energy selector switch (1). The energy selector switch (1) has four settings:
Off (2)
Mains voltage (230V AC) (3)
Off (4)
Gas (liquid gas propane/butane) (5)
Electrical operation
Switch on the appliance by turning the energy selection switch (1) clockwise to position :
230V operation.
Gas operation (Liquid gas)
Prior to starting the refrigerator in gas mode :
Open the gas cylinder valve.
1. Turn the rotary selector switch (1) to position
gas operation.
2. Turn the temperature selector (2) clockwise and push. Keep the controller button depressed.
3. Activate Piezo ignition (3) several times at intervals 1-2 second.
4. Once the flame ignites, the pointer of galvanometer (4) begins moving into the green range. Keep knob (2) depressed for approx. 15 seconds and finally release it.
The refrigerator is operational.
Setting of cooling compartment temperature
To Next Page
Loading...
