Installation TEC29 EV AUS
26
8.4 Installing the tank and fuel supply line
Please observe the following instructions for the installation location:
The tank bottom must be positioned at a maximum of 0.3 m below the
bottom of the generator.
The top of the tank must not be higher than the top of the generator.
➤ Lay the fuel line as straight as possible.
➤ Secure the tank, see fig. c, page 7 and chapter “Connecting the float” on
page 31.
8.5 Mounting the digital control panel
Please observe the following instructions for the installation location:
Observe the length of the extension cable from the digital control panel to
the generator.
➤ Drill the holes as shown in fig. d, page 8.
➤ Insert the plug into the digital control panel.
➤ Screw on the digital control panel.
To Next Page
Loading...
