Dometic VFS - General Information; Intended Use

4
EN
Flush Controls
2 GENERAL INFORMATION
Included Parts Quantity
Flush switch assembly 1
Ethernet cable 1
Mounting screws 4
Recommended Tools
Phillips Screwdriver Drill
3 INTENDED USE
This flush switch is designed and intended for use only inside a boat or recreational vehicle
(hereinaer referred to as “RV”) for which it is supplied. Use the instructions to ensure correct
installation and operation of the flush switch. Dometic accepts no liability for damage in the
following cases:
• Faulty assembly or connection.
• Damage to the product resulting from mechanical influences and excess voltage.
• Alterations to the product without expressed permission from the Dometic Corporation.
• Use for purposes other than those described in the operating manual.
Dometic Corporation reserves the right to modify appearances and specifications without notice.