Donaldson Torit DFT 2-12 User Manual

Installation
and Operation Manual
IOM AD3310701
Revision 7
Downflo
®
II
DFT 2-8, 2-12, 2-16, 2-24, 2-36
DFT 3-12, 3-24, 3-26, 3-48, 3-60, 3-72,
DFT 4-16, 4-32, 4-48, 4-64, 4-80, 4-96, 4-112, 4-128
Units Built After July 2003
Throughout this manual
statements indicating
precautions necessary
to avoid equipment failure
are referenced in a Note. Statements
indicating potential hazards that
could result in personal injury or
property damage are referenced
in a CAUTION! box.
Installation,
Operation, and
Service Information
This manual is property of the owner. Leave with the unit when set-up and start-
up are complete. Donaldson Company reserves the right to change design and
specifications without prior notice.

Donaldson Torit DFT 2-12 Specifications

General

Model	DFT 2-12
Type	Dust Collector
Airflow Capacity (CFM)	1200
Number of Filters	2
Filter Type	Cartridge
Inlet Size	8 inches

Summary

Operation

Installation

Site Selection, Grade-Mounted Units

Unit Location

Electrical Wiring

Rigging Instructions

Typical Installation

Compressed Air Installation

Solid-State Timer Installation

Solenoid Connection

Timer and Solenoid Specifications

Preliminary Start-Up

Filter Installation and Replacement

Provides CAUTIONs for filter handling and details the steps for filter removal, including turning off power and removing access covers.

Filter Replacement

Compressed Air Components

Optional Equipment

Power Pack

Introduces optional equipment like power packs and their installation on the top or side of the unit.

Side-Mount Power Pack

Troubleshooting

Blower fan and motor do not start

Lists causes like improper wire size or incorrect wiring and suggests remedies such as rewiring or checking voltage.

Blower fan and motor start, but do not stay running

Identifies issues like incorrect starter installation or open access doors and provides solutions like checking starter or closing doors.

Insufficient airflow

Covers causes like backward fan rotation or restricted exhaust and suggests checking rotation or clearing obstructions.