Donaldson Torit DFT 2-16 User Manual

Installation
and Operation Manual
IOM AD3310701
Revision 7
Downflo
®
II
DFT 2-8, 2-12, 2-16, 2-24, 2-36
DFT 3-12, 3-24, 3-26, 3-48, 3-60, 3-72,
DFT 4-16, 4-32, 4-48, 4-64, 4-80, 4-96, 4-112, 4-128
Units Built After July 2003
Throughout this manual
statements indicating
precautions necessary
to avoid equipment failure
are referenced in a Note. Statements
indicating potential hazards that
could result in personal injury or
property damage are referenced
in a CAUTION! box.
Installation,
Operation, and
Service Information
This manual is property of the owner. Leave with the unit when set-up and start-
up are complete. Donaldson Company reserves the right to change design and
specifications without prior notice.

Donaldson Torit DFT 2-16 Specifications

General

Model	DFT 2-16
Type	Dust Collector
Number of Filters	2
Filter Type	Cartridge
Phase	3
Application	General industrial dust collection
Voltage	460V
Filter Media	Ultra-Web

Summary

Installation, Operation, and Service Information

Installation Procedures

Detailed steps for installing the dust collector, including site selection and component assembly.

Site Selection and Unit Location

Guidelines for choosing a suitable location and foundation for mounting the unit.

Electrical and Compressed Air Connections

Instructions for wiring the unit and connecting the compressed air supply.

Module and Component Assembly

Steps for assembling modules, yokes, filters, and hoppers.

Optional Equipment Installation

Guides for installing optional power packs, drum packs, gauges, and controls.

Specialty Component Installation

Procedures for installing transition valves, silencers, explosion vents, and sprinklers.

Access and Climate Features

Installation of platforms, ladders, and cold climate protection kits.

Unit Operation Principle

Explanation of normal operation and the filter cleaning mechanism.

Preliminary Start-Up and Service

Essential checks before initial operation and ongoing service guidelines.

Filter Management

Procedures for removing, replacing, and handling filter cartridges.

Dust Disposal and Air Components

Procedures for emptying dust containers and maintaining compressed air systems.

Troubleshooting Guide

Solutions for common problems like fan issues, airflow, and control system errors.

Fan and Motor Issues

Diagnosing and fixing problems with the blower fan and motor operation.

Airflow and Dust Discharge Problems

Addressing issues like insufficient airflow or dust escaping the clean-air outlet.

Control System Faults

Troubleshooting Delta P controls, alarms, and cleaning system malfunctions.

The Donaldson Torit Warranty

Details the terms and conditions of the manufacturer's warranty for the equipment.