To Next PageTo Next Page
Need help?Do you have a question about the Donaldson Torit DFT 4-64 and is the answer not in the manual?
General| Brand | Donaldson Torit |
|---|---|
| Model | DFT 4-64 |
| Category | Industrial Equipment |
| Language | English |
Guidance on choosing a location for grade-mounted units.
Factors to consider when determining the final placement of the collector.
Details on safely lifting and moving the equipment.
Step-by-step instructions for assembling the unit's modules.
How to wire the solenoid valves to the solid-state timer.
Technical details and operating parameters for the timer and solenoids.
Procedures for safely removing used filter cartridges.
Installation and specifications for the unit's power pack.
Instructions for attaching the drum pack with a slide gate.
Instructions for attaching the drum pack without a slide gate.
Overview of the Delta P Control's function and features.
How the Delta P Control functions during normal operation and filter cleaning.
Explanation of alarm conditions and their triggers.
Overview of the Delta P Plus Control's features and set points.
Details on the three filter cleaning options: DFF, DTC, and ALL.
Instructions for installing the damper and silencer in side or top configurations.
Installation steps for the plenum silencer when top-mounted.
Steps for pre-assembling and installing stationary platforms.
Identifies causes and solutions for the blower fan and motor failing to start.
Addresses issues where the blower starts but stops unexpectedly.
Solutions for dust escaping from the clean-air outlet.
Diagnosing and resolving low airflow issues.
Diagnosing why the cleaning system fails to activate with Delta P control.
Solutions for continuous pulse-cleaning cycles.
Identifying causes for the Delta P control alarm light activation.
