To Next PageTo Next Page
Need help?Do you have a question about the Donaldson Torit DFT 2-8 and is the answer not in the manual?
General| Number of Filter Packs | 2 |
|---|---|
| Power Source | Electric |
| Filter Media | Nanofiber |
| Dust Discharge | Drum |
| Housing Material | Steel |
Overview of the Downflo II dust collector's design, modularity, and features.
Applications and suitability of the dust collector for various industrial dust control needs.
Explains the normal airflow and dust collection process within the unit.
Details the pulse-jet cleaning sequence for the filter cartridges.
Steps for inspecting the unit upon delivery and reporting any damage or discrepancies.
Guidelines and compliance requirements for installing the dust collection equipment.
Guidance on choosing an appropriate location, foundation, and clearance for the unit.
Covers electrical installation requirements, codes, and wiring diagrams for safe operation.
Guidelines for safely lifting, moving, and assembling the dust collection unit.
Specific advice and safety precautions for lifting the unit using cranes or forklifts.
Visual step-by-step guide for the general assembly and installation of the dust collector.
Lists the components included as standard equipment with the dust collector.
Instructions for assembling modules if shipped separately due to transport or customer requirements.
Detailed instructions for assembling the modular components of the dust collector.
Procedures for installing yokes, venturis, and filter cartridges into the collector modules.
Instructions for mounting the hopper to the collector unit, including different styles.
Procedures for assembling and attaching the leg sets for unit support and stability.
Detailed steps for assembling the leg sets and cross braces for structural support.
Guidance on connecting the compressed air supply and installing associated components like regulators and filters.
Information on periodically checking and maintaining compressed air system parts like filters and valves.
Instructions for wiring, configuring, and operating the solid-state timer for filter cleaning cycles.
Guide for installing the Magnehelic differential pressure gauge for filter monitoring.
Details on installing and wiring the Photohelic gauge for pressure monitoring and switching.
Explains the Delta P control system for monitoring pressure drop and managing filter cleaning cycles.
Details the advanced Delta P Plus control for pressure monitoring and enhanced cleaning options.
Instructions for installing top-mounted and side-mounted power packs for the unit.
Specific guidance for installing the side-mounted power pack adapter and blower assembly.
Guide for installing the drum pack for dust collection and disposal, with and without a slide gate.
Instructions for installing the cold climate kit to prevent freeze-up of pulse valves in cold weather.
Safety precautions and installation guidance for explosion relief vents.
Procedures and considerations for installing optional fire control sprinkler systems.
Solutions for problems related to the blower fan and motor not starting or running.
Addresses issues like insufficient airflow and dust discharge from the clean-air outlet.
Troubleshooting steps for issues with the solid-state timer, Delta P controls, and solenoids.
Details the warranty coverage, limitations, and conditions for Donaldson Torit products.
Provides contact information for obtaining replacement parts and technical service.
