TECHNISCHE DATEN
www.doorbird.com
Remove the keypad protective
housing.
Replace the rubber seal.
Replace the keypad buttons.
To assemble, follow these steps in
reverse order.
Before replacing the keypad the existing
cable connection has to be removed.
Loosen the four nuts of the
keypad protective housing.
1
2
3
4
Manual
REPLACING THE KEYPAD MODULE
D21x series
Stand 05/2018 – Copyright © 2018 Bird Home Automation GmbH – www.doorbird.comErrors and omissions excepted. |
To Next Page
Need help?
General
