DoorHan ISD01 Series - Panel Components; Tracks and Torsion Gear

12
4.1.2. The closing the door
4.1.2.1. The closing the door from outside of the premises
1. Lower the sectional door,
keeping it at the handle, to the
bottom position.
2. Turn the lock handle
counterclockwise by 90°.
4.1.2.2. The closing the door from inside of the premises
1. Lower the sectional door leaf,
keeping it at the handle, to the
bottom position.
2. Turn the handle clockwise
by 90°.
3. Push the latch in the
closing direction. For
engagement with the mating
part, put the latch handle
parallel to the door leaf.*
4.2. The door operation with the motor drive
WHEN OPERATING THE DOOR, EQUIPPED WITH THE MOTOR
DRIVE, USE ADDITIONAL OPERATIONAL DOCUMENTS FOR THE
MOTOR DRIVE.
4.2.1. The ceiling motor drives of the series Sectional and Fast
WHEN USING A CEILING MOTOR DRIVE WITH THE DOOR
INSTALLED IN A ROOM WITHOUT ADDITIONAL ENTRANCE, BE
SURE TO USE AN EXTERNAL RELEASER DOORHAN.
* When locking device of the mechanical latch is available.