Maintenance Section
107
Tires and Wheels - Inspect
Inspect tires and valve stems for wear, cuts,
gouges and foreign objects.
Check all components carefully and replace any
cracked, badly worn, damaged and severely rusted
or corroded parts with new parts of the same size
and type. If there is any doubt, replace with new
parts. Do not, under any circumstances, attempt to
rework, weld, heat or braze any rim components.
Check Inflation Pressure (If equipped with
pneumatic tires)
Measure the tire air pressure on each tire.
Inflate the tires, if necessary. See “Tire Inflation
Information” section of this manual.
To Next Page
