Maintenance Section
96
Power Modules – Discharge
Personal injury could result if power modules
have not been discharged properly.
Battery voltage and high amperage are present.
The power modules must be discharged before
any contact with the electrical control system is
made.
Before touching any electrical components,
remove rings, watches and other metallic
objects from the hands and arms, then
discharge the power modules.
The power modules is located in the control panel
at the rear of the lift truck.
[OUTSIDE BATTERY CONNECTOR]
[INSIDE BATTERY CONNECTOR]
\
1. Disconnect the battery.
2. Open the hood.
To Next Page
