Maintenance Section
109
Every 500 Service Hours or 3 Months
You must read and understand the warnings and instructions contained in the Safety section of this manual,
before performing any operation or maintenance procedures.
Tilt Cylinders
Chassis Pivot Eyebolts - Lubricate
1. Remove floor plates.
2. Lubricate pivot eyebolts, one fitting on each tilt
cylinder.
3. Check the pivot eye pins for loose retainer bolts
and wear.
Mast Pivot Eyes - Lubricate
1. Lubricate the mast pivot eyes, one fitting on each
side of the mast.
2. Check the mast pivot eye pins for loose retainer
bolts and wear.
To Next Page
