Maintenance Section
-151-
Walk - Around Inspection - Inspect
For maximum service life of the lift truck, make a
thorough walk-around inspection.
Look around and under the truck for such items as loose
or missing bolts, debris or dirt buildup, fuel, oil or coolant
leaks and cut gouged tires.
Have any repairs made and debris removed, as needed.
1. Inspect the tires and wheels for cuts, gouges,
foreign objects, inflation pressure and loose or
missing bolts.
2. Inspect the mast and lift chains for wear, broken
links, pins and loose rollers.
3. Inspect the hydraulic system for leaks, worn hoses
or damaged lines.
4. Look for transmission and differential leaks on the lift
truck and on the ground.
5. Inspect the operator’s compartment for loose items
and cleanliness.
6. Inspect the instrument panel for broken gauges and
indicator lights.
7. Test the horn and other safety devices for proper
operation.
Typical Example TIER II Diesel Engine Truck
Typical Example LP Engine Truck
8. Inspect the cooling system for leaks, worn hoses
and debris buildup.
9. Inspect engine compartment for oil, coolant and fuel
leaks.
10. Inspect the forks.
z Visually inspect forks for cracks, especially in the
heel section, around the mounting brackets, and all
weld areas.
z Inspect for broken or jagged fork tips, bent or
twisted blades and shanks.
z Make sure positioning lock is in place and working.
Lock the forks in position before using the truck.
See Step 7 of “ Forks ” in “ Every 2000 Service
Hours or Yearly ”
z Remove all defective forks from service.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
