DPF Switch
This switch is used for performing
operation relevant to DPF regeneration. If
the light of the same logo of the top
switches on the instrument panel turns on,
park the vehicle at a safe place, and
perform service regeneration. Pressing a same logo
of the DPF switches two or three seconds returns
the switch to the neutral position, and causes
service regeneration for approx. 20 to 30 minutes. In
such a case the rotation rate of the engine
automatically rises. Once regeneration is complete,
the rotation rate returns to idle rate, and the light
turns off.
The bottom switch is used for blocking automatic
regeneration and service recycling of DPF. The light
turns on if pressing a same logo permanently, and
turns off when placing the DPF switch on the neutral
position.
Tow Eye
Typical Example
It is for emergency use in towing a disabled vehicle
or being towed by another truck when your truck is
disabled. Use wire rope strong enough according to
the weight and size of the vehicle to be towed.
Steering Column Tilting Angle
Adjustment
Typical Example
The tilting angle of the steering wheel is adjustable
within a range of 15 degrees to suit individual
operators. The steering column is unlocked by
turning the lever counter clockwise and locked by
turning it clockwise.
Electrical Disconnect Switch (If
Equipped)
1. ON - Connects the battery for electrical
power to all electrical circuits.
2. OFF - Disconnects the battery from all
electrical circuit.
To Next Page
