3. Performance and specifications
23
Lubrication method Fully forced pressure feed type
Oil pump
Type Gear type
Driving type Driven by crankshaft gear
Oil filter Full flow, Cartridge type
Oil capacity (L)
Max. 34
Min. 23
Lubrication oil
pressure (kPa)
Idle speed Min. 100
Governed
speed
Min. 250
Max. oil temperature (°)
120
Oil specification
Oil class CI-4 or higher
SAE 10W/40
Fuel System
Injection pump Bosch in-line "P" type
Governor Electric type
Fuel feed pump
Type Mechanical type injection pump
Capacity (L/hr) 630
Injection nozzle
Type Multi-hole (4 hole)
Opening pres-
sure (MPa)
28
Fuel filter Full flow, Cartridge type with water drain valve
Fuel Used Diesel fuel oil
Intake/Exhaust System
Max. back pressure (kPa) 5.9
Max. intake air
restriction (kPa)
With clean filter
element
2.16
With dirty filter
element
6.23
Cylinder block/head
Valve system type Overhead valve type
No. of valve (per
cylinder)
Intake 1
Exhaust 1
Valve lashes (at
cold) (mm)
Intake 0.25 ±0.05
Exhaust 0.35 ±0.05
Item
DP180L
Remarks
DP180LBS DP180LBF DP180LAS DP180LAF
To Next Page
Loading...
