3. Performance and specifications
25
Item
DP222L
Remarks
DP222LAS DP222LBS DP222LBF DP222LCS DP222LCF
General Information
Engine types Water-cooled, 4cylcle, V-type Turbo charger & Inter cooled (air to air)
Cylinder liner type Wet Type
No. of cylinder - bore x stroke
(mm)
12 - 128 X 142
Total displacement(cc) 21,927
Compression ratio 14.9 : 1
Rotation Counter clockwise viewed from flywheel
Firing order 1-12-5-8-3-10-6-7-2-11-4-9
Injection timing (°) (BTDC) 21° ±1° 21° ±1° 19° ±1° 21° ±1° 19° ±1°
Dry weight (kg) 1,420 With fan
Dimension (L x W x H)(mm) 1,738 X 1,389 X 1,258 With fan
Flywheel housing SAE NO.1M
Flywheel Clutch NO.14M
No. of teeth on flywheel 160
Cooling System
Cooling method Fresh water forced circulation
Coolant
capacity (L)
Engine only Approx. 33
With radiator Approx. 114 (Air on 43°C) / Approx 125 (Air on 52°C)
Coolant flow rate (L/min) 660 660 550 660 550
Pressure cap (kPa) Max. 49
Water tem-
perature (°C)
Max. for
stand by and
prime
103
Before start of
full load
40
Water pump Centrifugal type driven by belt
Thermostat
Type Wax-pellet type
Opening
temp. (°C)
71
Full open
temp. (°C)
85
Cooling fan
Type Blow Type
Diameter -
blades
915mm - 9 blades
Lubrication System
To Next Page
Loading...
