Doosan GL08K - Page 98

Maintenance - 92 -
 Align the bolt holes with gasket holes to
prevent damage to the gasket and
tighten.
3.3.23. Oil filter
 Install the oil filter onto the cylinder
block, and tighten the fixing bolts.
 Apply engine oil to the oil filter cartridge
oring and assemble the cartridge using
a filter wrench.
3.3.24. Oil cooler
 Install the gasket on the cylinder block.
 Assemble the oil cooler by tightening
the assembling bolts.
 Connect the cooling water pipe with the
cooling water pump and tighten a hose
clamp.
3.3.25. Starting motor
 Assemble the starter in position on the
flywheel housing.
EB8M3002
Torque 2.2 kg • m
EB5M3008
Torque 2.2 kg • m
EJ3OM014
Torque 4.4 kg • m