3.8. Cooling System
The engine has a liquid-cooling system. The fresh water pump is a maintenance-free by V-belt
from the crankshaft pulley.
Depending on the agreed extent of delivery and the design of the engine, the coolant circuit can
be equipped with temperature monitors which, in the event of loss of coolant, shut the engine
down.
•
Check the coolant level of the expansion tank by removing the expansion tank filler cap, and
add coolant if necessary.
•
When injecting antifreeze solution, first drain out the old coolant from the cylinder block and
radiator, and then clean them with cleaning solution.
•
Be sure to mix soft water with antifreeze solution.
- 19 -
To Next Page
Loading...
Need help?
General
