CONTENTS
<Operation>
1. Safety Regulations ................................................................................................................... 1
1.1. General Notes 1.4.
Regulations Designed to Prevent Pollution
1.2.
Regulations Designed to Prevent Accidents
1.5.
Notes on Safety in Handling Used Engine Oi
l
1.3.
Regulations Designed to Prevent
Damage to Engine and Premature Wear
2. General Information .................................................................................................................. 5
2.1. Engine Assembly 2.2. Engine Specification
3. Technical Information ............................................................................................................. 12
3.1. Engine Model and Serial Number 3.7. Fuel System
3.2. Engine Type 3.8. Cooling System
3.3. Engine Timing 3.9. V-belt Tension Check and Adjust
3.4. Valves 3.10. Turbocharger
3.5. Lubrication System 3.11. Electrical Equipment
3.6. Air Cleaner
4. Commissioning and Operation ............................................................................................. 28
4.1. Preparation 4.4. Operation in Winter Time
4.2. Breaking-in 4.5. Tuning the Engine
4.3. Inspections after Starting
5. Maintenance and Care ............................................................................................................ 32
5.1. Periodical Inspection and Maintenance 5.5. Fuel System
5.2. Lubrication System 5.6. Injection Nozzle Maintenance
5.3. Cooling System 5.7. Turbocharger
5.4. Air Intake System
6. Checking and Setting ............................................................................................................. 46
6.1. Adjustment of Valve Clearance 6.3. Cylinder Compression Pressure
6.2. Adjustment of Injection Timing 6.4. V-belts
7. Operation Tip ........................................................................................................................... 52
7.1. Periodic Inspection Cycle 7.3. Causes and Remedies
7.2. Trouble Shooting