9.1.4. Engine oil
•
Remove the oil drain cock of oil pan
and pour the engine oil into the
prepared vessel.
9.1.5. Cooling fan
•
Remove the flange fixing bolts, then
take off the flange and cooling fan.
9.1.6. V-belt
•
Remove the V-belt by loosening
the alternator tension adjusting
bolt and tighten the bolt.
9.1.7. Starter
•
Loosen the starter assembling nuts
and remove the starter being care-
ful not to damage its gears.
- 67 -
To Next Page
Loading...
Need help?
General
