Dorma ED 100 Operating Instructions

2. EC declaration of conformity
The undersigned representing the following manufacturer
DORMA GmbH + Co. KG
DORMA Platz 1
58256 Ennepetal
Germany
declares that the product
ED 100, ED 250
complies with the provisions of the EC Directive(s) specified in the Appendix and that the standards and/or technical specifi-
cations referred to in the Appendix were applied.
Richtlinie / Directive
X
2006/95/EG Niederspannungsrichtlinie / Low Voltage Directive / Directive basse tension
89/106/EWG/EEC/CEE Bauprodukte / Building products / Produits de construction
X
2004/108/EG Elektromagnetische Verträglichkeit / Electromagnetic compatibility / Compatibilité électroma-
gnétique
2006/42/EG Maschinenrichtlinie / Machinery directive / Directive machine
Die technischen Unterlagen sind erhältlich beim Manager Productcompliance unter: /
The technical documentation is available from the Product Compliance Manager at: /
Les documents techniques sont disponibles auprès du Manager conformité produit à
l’adresse suivante: product.compliance@dorma.com
Harmonisierte europäische Norm, nationale Regel / Harmonized European standard, national rule /
Norme européenne harmonisée, disposition nationale:
X EN 138 49-1 X EN 61000 - 3 - 2 EN 179
EN ISO 12100 X EN 61000 - 3 - 3 EN 1125
X EN ISO 12100-1 EN 55014 EN 1154
X EN ISO 14121-1 X EN 55022 EN 1155
X BGR 232 X EN 60335 - 1 EN 1158
X EN 61000 - 6 - 2 X EN 60950 - 1 EN 1935
X EN 61000 - 6 - 3 EN 12209
3. EC declaration of incorpofration
The manufacturer
DORMA GmbH + Co. KG
DORMA Platz 1
58256 Ennepetal
Germany
declares that the incomplete machine
ED 100, ED 250
complies with the following basic requirements of the Machinery Directive (2006/42/EC) - Annex I, Section:
1.1.3, 1.1.5, 1.2.1, 1.2.3, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8.1, 1.3.9, 1.5.1, 1.5.2, 1.5.4- 1.5.10,
1.5.16, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.7.1.1, 1.7.3, 1.7.4
The incomplete machine further complies with all relevant provisions of Directives 2006/95/EC and 2004/108/EC.
It may be incorporated and operated in automatic door control mechanisms in conformity with the Machinery Directive pro-
vided that the manufacturer of the systems ensures that all requirements under the Machinery Directive are met and an EC
Declaration of Conformity has been issued.
The specific technical documentation was prepared and is available from the Product Compliance Manager at product.
compliance@dorma.com.
It will be electronically forwarded to individual public authorities in response to a duly reasoned request.
ED 100, ED 250
—
4 DORMA

Dorma ED 100 Specifications

General

Adjustable Closing Speed	Yes
Latching Speed	Adjustable
Type	Electromechanical
Power Supply	230 V AC, 50 Hz
Fire Rated	Yes
Backcheck	Adjustable
Delayed Action	Adjustable
Hold-Open Function	Yes
Finish	Silver