Need help?Do you have a question about the Dormakaba 660 Series and is the answer not in the manual?
General| Type | Electromagnetic Lock |
|---|---|
| Mounting | Surface mount |
| Door Thickness | 1-3/4" (44mm) standard. Other thicknesses may require modification or shims. |
| Voltage | 12V DC or 24V DC |
| Current Consumption | 12V DC: 500mA, 24V DC: 250mA |
| Holding Force | 1200 lbs (544 kg) |
| Series | 660 Series |
Procedure to verify and ensure correct mortise handing for door installation.
Detailed instructions for mortising the door edge and installing the mortise lock body.
Verifying lock response to keycards and LED indicators before programming.
Steps for programming the lock with room numbers and security parameters.
Testing emergency keycard access and lever detection for 79T models.
Instructions for programming locks using the Front Desk Unit (FDU).
Guide for programming locks using the M-Unit (Maintenance Unit) in ATLAS.
Programming instructions for multihousing locks using M-unit or EAMU FDU.
Programming locks using M-unit and Aurora software.
Programming locks using M-unit and Enterprise software.
Steps to use the Front Desk Unit (FDU) for electronic override.
Instructions for using ATLAS for electronic override.
Procedure for activating and programming the 660i lock model.
Programming the lock and testing code entry and access for 660 series.
Testing emergency access and deadbolt/privacy override functionality.
Procedures to test the mechanical override function after installation.
Instructions for installing the strike for cylindrical lock models.
To Next Page