Version notes Technical Manual
4 V28 - 08/2019Electronic safe lock
Firmware version Date Reason
• Operating system compatibility of AS284-W
programming software
• AS284-W programming software with ex-
tended function
V24 2017-06 New functionality:
• The Master Code can override the Immediate
Time Lock
V23 2017-02 New functionalities:
• Time Locking in OTM
• Axessor CIT safe lock with time display
• Harmonized bolt open times
• OTM can override NRTD
• Special function: User Code 41 configured as
Audit and Battery Code
• Special function: User Code 42 configured as
Audit and Battery Code and used for CIT or
IP activation
• Special function: User Codes 45 and 46 used
for activation of the output impulse signal
• Special function: User Code 47 configured as
Time, Audit and Battery Code
• Special function: User Code 48 used for Lock
Disabling and User Code 49 used for Lock En-
abling
• Immediate Time Lock when the safe is closed
• Setting the beeper via input unit
• Selection of days for time-related functions
• Door Open Alarm is separately configurable
• Dual Mode timeout is configurable
To Next Page
Loading...
Need help?
General