Dormakaba ORACODE 480 Series User Manual

Oracode
480-480i Series
Installation Instructions
PK3700 - 05/2023
Original document
EN

Dormakaba ORACODE 480 Series Specifications

General

Type	Electronic Lock
Keyless Entry	Yes
Application	Commercial
Programming	Keypad
Material	Metal
Power Supply	Battery
Access Control	PIN Code
Lock Type	Mortise
Backset	2-3/4 inches
Key Override	Yes
Series	480
Communication	Standalone
Mounting	Mortise
Compatibility	Standard doors

Summary

Install Strike on Wood Frame

Install Strike on Steel Frame

Door Preparation

Adjust Backset of Deadbolt

Install Deadbolt in Door

Key Override Cylinder Installation

Adjust Lock Handing

Assemble Tail Piece

Remove Inside Cover

Assemble Outside Housing

Install Inside Trim Assembly

Install Inside Cover

Lock Programming with M-Unit

Testing Lock Operation

Testing Mechanical Override

Cover the Key Hole

Maintenance

Oracode Smart Controller Installation

Smart Controller Positioning

Guidelines for optimal placement of the Smart Controller relative to the lock and Wi-Fi.

Smart Controller Connection

Steps to connect the Smart Controller to the internet and power adapter.

Wireless Lock Activation

Activation Code Generation

Generate an activation code via the Oracode Live account for wireless lock setup.

Activation Process (with Oracode Live)

Steps to activate the lock using the Smart Controller's MAC address and activation code.

Oracode Smart Controller Diagnostics

Lock to Smart Controller Connection Status

Test the connection status between the lock and the Smart Controller.

Wireless Link Test

Perform a wireless link test to assess the connection quality with the gateway.

Smart Controller Reset to Factory Default

Procedure to reset the Smart Controller to its factory default settings.