Need help?Do you have a question about the Dormakaba Combi B 90 and is the answer not in the manual?
Describes the Combi B 90 electronic safe locks and their information scope.
States the document is intended for end users.
Lists other available documents for the Combi B 90 system.
Explains the purpose and operational environment for the safe lock.
Provides a notice about handling the product correctly to avoid damage.
Offers tips for usage and useful information about product functions.
Introduces the lock system components, operating environment, and input unit elements.
Lists the different authorization levels and their capabilities.
Details commands and their associated functions and authorization levels.
Explains the meaning of different signals (lights, sounds) and their events.
Details the initial setup process, including using the Setup Code and activating the Master Code.
Explains how to configure settings using the Master Code.
Details the process for creating new user or courier codes.
Explains how to disable existing user or courier codes.
Outlines the steps to re-enable previously disabled user or courier codes.
Describes the procedure for permanently deleting user or courier codes.
Details how to query the status of existing codes.
Explains how to activate Opening Delay (OD) and Confirmation Window (CW) settings.
Details the process to deactivate Opening Delay (OD) and Confirmation Window (CW).
Describes how to activate Dual Mode, requiring two codes for opening.
Explains how to deactivate the Dual Mode function.
Covers the activation of the Duress Alarm for security alerts.
Details how to deactivate the Duress Alarm function.
Explains how to acknowledge tamper switch messages.
Details configuration options available through the Manager Code.
Provides steps to change the Manager Code.
Describes how to create new user or courier codes using the Manager Code.
Explains how to disable user or courier codes via the Manager Code.
Details the process to enable previously disabled user or courier codes.
Outlines how to permanently delete user or courier codes using the Manager Code.
Explains how to query the status of codes using the Manager Code.
Describes activating Opening Delay (OD) and Confirmation Window (CW) for the Manager Code.
Details deactivating Opening Delay (OD) and Confirmation Window (CW) for the Manager Code.
Explains how to activate Dual Mode for the Manager Code.
Details how to deactivate Dual Mode for the Manager Code.
Covers general lock functions accessible by all user types.
Details how to open the lock when OD and CW are not configured.
Explains how to open the lock when OD and CW are configured.
Describes the procedure for opening the lock when Dual Mode is active.
Details how to open the lock using a Duress Code while triggering an alarm.
Explains the lockout period mechanism after incorrect code entries.
Provides instructions on how to properly close the lock.
Describes how users can change their own codes.
Discusses additional functions configurable via PC software.
Covers operations related to the emergency key.
Details the procedure for opening the lock using the emergency key.
Explains how to close the lock using the emergency key.
Details how to change the Master Code using the emergency key.
Describes the procedure for resetting the lock to its default settings.
Explains how to reconfigure the lock using PC software.
Covers various special functions of the lock.
Details how to connect the lock to PC software for configuration.
Explains how to use signal inputs for additional functions.
Describes additional functions available through signal outputs.
Covers power supply options, including battery replacement and permanent power.
Details the step-by-step process for replacing the lock's batteries.
To Next Page
General