Dormakaba Combi B 90 - Default Chapter; Table of Contents

Table of Contents User Manual
2
- 02/2022dormakaba Combi B 90 with metal input unit
Table of Contents
1 Glossary 4
2 About this document 5
2.1 Purpose and objective 5
2.2 Target group 5
2.3 Additional documents 5
3 Safety information 6
3.1 Intended use 6
3.2 Hazard category 6
3.3 Info 6
4 Product overview 7
4.1 Lock system 7
5 Functionality 9
5.1 Authorizations 9
5.2 Overview of commands 10
5.3 Overview of possible signals 11
6 Operation 13
6.1 Start-up of the lock 13
6.2 Configuration functions of the Master Code 14
6.2.1 Changing the Master Code 14
6.2.2 Creating User Codes or the Courier Code (P3) 15
6.2.3 Disabling User Codes or the Courier Code (P4) 16
6.2.4 Enabling User Codes or the Courier Code (P4) 16
6.2.5 Deleting User Codes or the Courier Code (P5) 17
6.2.6 Code status query (P6) 17
6.2.7 Activating OD and CW (P2) 18
6.2.8 Deactivating OD and CW (P2) 19
6.2.9 Activating Dual Mode (P7) 19
6.2.10 Deactivating Dual Mode (P7) 20
6.2.11 Activating Duress Alarm (P8) 20
6.2.12 Deactivating Duress Alarm (P8) 21
6.2.13 Acknowledging the tamper switch message (P9) 21
6.3 Configuration functions of the Manager Code 22
6.3.1 Changing the Manager Code (P) 22
6.3.2 Creating User Codes or the Courier Code (P3) 23
6.3.3 Disabling User Codes or the Courier Code (P4) 23
6.3.4 Enabling User Codes or the Courier Code (P4) 24
6.3.5 Deleting User Codes or the Courier Code (P5) 25
6.3.6 Code status query (P6) 25
6.3.7 Activating OD and CW (P2) 26
6.3.8 Deactivating OD and CW (P2) 26
6.3.9 Activating Dual Mode (P7) 27
6.3.10 Deactivating Dual Mode (P7) 27
6.4 Lock functions of all users 28
6.4.1 Opening the lock without configured OD and CW 28
6.4.2 Opening the lock with configured OD and CW 28
6.4.3 Opening with Dual Mode 29
6.4.4 Opening with Duress Alarm 30
6.4.5 Lockout period 31
6.4.6 Closing the lock 31
6.4.7 Changing codes (P) 31
6.4.8 Opening with activated additional functions 32