5. Press the ENTER key.
ð The green light blinks twice and the acoustic signal sounds twice.
6. Enter all the IDs to be requested successively.
7. Press the ENTER key.
ð 1 code status message is generated for each ID.
8. Cancel the query mode by pressing PP.
9. Alternatively wait for 89 seconds.
ð The red light blinks 3 times and the acoustic signal sounds 3 times.
6.2.7 Activating OD and CW (P2)
Opening Delay (OD) is the time period which must elapse before it is possible to open the
lock. The Confirmation Window (CW) is the time window during which it is possible to open
the lock as soon as OD has elapsed. To activate OD the possible value to be defined is
between 1 and 99 minutes. To activate CW the possible value to be defined is between 1 and
19 minutes. The set times apply to all users and the master but not to the courier.
If the function OD/CW is activated and values for OD/CW were defined, those values are
valid for the Master Code, Manager Code and all activated User Codes except for the Courier
Code. The Courier Code can still open the lock.
1. Press P.
2. Enter the valid Master Code 00XXXXXX.
00 = ID; X = valid 6-digit combination for the Master Code
3. Press the ENTER key.
ð The green light blinks twice and stays on, the acoustic signal sounds twice.
4. Press P2.
5. Press the ENTER key.
ð The green light is on and the acoustic signal sounds twice.
6. Enter a defined value for the Opening Delay XX.
7. Enter a defined value for the Confirmation Window YY.
XX = 01 to 99 min.; YY = 01 to 19 min.
8. Press the ENTER key.
ð The green light turns off and the acoustic signal sounds twice.
If the red light blinks 3 times and the acoustic signal sounds 3 times, the defined times are
outside the maximum permitted range. The red light blinks 3 times and the acoustic signal
sounds 3 times if 00 is only defined either for OD or for CW. The activation of OD/CW is only
possible with defined valid values.
Operation User Manual
18 - 02/2022dormakaba Combi B 90 with metal input unit